IFAN Professional Design PPR Fittings

Understanding PPR Material Sensitivity

PPR is a thermoplastic polymer. It responds to environmental conditions. Heat, light, and pressure affect it. Improper storage causes damage. This leads to installation problems. It can also cause premature system failure.

Protection from UV Light

Sunlight is damaging to PPR. UV radiation degrades the polymer. The surface becomes chalky and brittle. PPR fittings should never be stored outdoors. Keep them inside a building or shaded area. Use opaque covers if indoor storage is unavailable.

Avoiding High Temperatures

PPR softens at high temperatures. Prolonged heat causes deformation. Fittings can warp or bend out of shape. Store them below 40°C (104°F). Keep them away from heaters and boilers. Do not leave them in closed vehicles on hot days.

Preventing Mechanical Damage

PPR fittings are strong but not indestructible. Dropping them can cause cracks. Stacking heavy objects on top deforms them. Sharp impacts damage sealing surfaces. Handle them with care during storage. Use bins or shelves for organization.

Protection from Dust and Dirt

Dirt contamination is a serious issue. Dust on the sealing surface prevents proper fusion. It creates weak points in the welded joint. Store fittings in sealed bags or containers. Keep them away from construction dust. Clean them before installation.

Proper Storage for Elbows and Tees

Elbows and tees have complex shapes. They can nest together efficiently. Store them in bins by size and type. Do not force them into tight containers. This can stress the socket openings. Maintain their round shape for proper fitting.

Storage of Valve Fittings

Valves have moving internal parts. Store them in the open position. This relieves stress on the ball and seals. Protect the handle from impact damage. Keep valve fittings in their original boxes. This prevents accidental operation during storage.

Labeling and Organization

Use clear labels for different sizes. Separate fittings by diameter and type. This saves time during installation. It prevents using the wrong part accidentally. A well-organized storage system improves efficiency.

Avoiding Contact with Chemicals

PPR fittings resist many chemicals. However, some solvents cause damage. Keep them away from paints and thinners. Do not store near gasoline or oils. Avoid contact with strong acids. Chemical exposure can weaken the material.

Indoor Storage Recommendations

The best storage is indoors. A clean, dry warehouse is ideal. Maintain moderate temperatures. Keep fittings off the concrete floor. Use pallets or shelving instead. This protects from moisture and dirt.

Temporary Outdoor Storage

Sometimes indoor storage is impossible. For short periods, outdoor storage is acceptable. Cover the fittings with opaque tarps. Elevate them off the ground. Protect from rain and direct sun. Limit outdoor storage to a few days.

Handling and Transport Precautions

Use proper containers for transport. Do not throw fittings loose into a truck. This causes impact damage and dirt contamination. Use bins or bags for organization. Secure loads to prevent shifting during transport.

Conclusion on Proper Storage

Proper storage of PPR fittings ensures quality. Protect them from UV light and heat. Keep them clean and dry. Prevent mechanical damage and chemical exposure. Organize by size and type for efficiency. Following these guidelines guarantees that your fittings will perform reliably during installation and throughout their service life.

View more:https://www.ifanfittings.com/