Pipe cutter – essential tool
A manual or automatic pipe cutter is required. It makes a clean, square cut every time. Standard saws are not recommended. PPR-AL Stabi pipe needs precise cutting for proper connections.
Deburring tool – for clean edges
After cutting, the pipe has sharp edges. A deburring tool removes these burrs. This prevents damage to the O-ring. PPR-AL Stabi pipe requires a smooth, burr-free end.
Chamfering tool – for aluminum stripping
The aluminum layer must be removed before welding. A chamfering tool strips 2-3mm of aluminum. This exposes the PPR for fusion. PPR-AL Stabi pipe needs this preparation step.
Fusion welding machine – for joining
A PPR fusion welding tool is required. It heats the pipe and fitting to 260°C. The machine has different die sizes. PPR-AL Stabi pipe uses standard welding equipment.
Interchangeable dies – for different sizes
The welding machine needs interchangeable dies. Each die matches a specific pipe diameter. Common sizes are 20mm, 25mm, and 32mm. PPR-AL Stabi pipe dies must match the pipe.
Measuring tape or ruler
Accurate measurement is essential for cutting. Mark the pipe at the correct length. Use a pencil or marker for visibility. PPR-AL Stabi pipe requires precise length measurement.
Pipe support stands
Long pipe runs need support during installation. Stands hold the pipe at the correct height. This prevents strain on joints. PPR-AL Stabi pipe benefits from proper support.
Example: setting up a welding station
Place the welding machine on a stable surface. Install the correct dies for your pipe size. Turn the machine on to 260°C. PPR-AL Stabi pipe welding needs proper setup.
Example: cutting a pipe to length
Measure the required length accurately. Mark the pipe with a pencil. Use the pipe cutter to make a clean cut. PPR-AL Stabi pipe is cut like standard PPR.
Example: preparing for welding
After cutting, deburr the pipe end. Use the chamfering tool to strip aluminum. The pipe end is ready for heating. PPR-AL Stabi pipe preparation is quick and simple.
Safety equipment
Wear safety glasses when cutting pipes. Use heat-resistant gloves for welding. Work in a well-ventilated area. PPR-AL Stabi pipe installation requires basic safety gear.
Final tool summary
PPR-AL Stabi pipes require a pipe cutter, deburring tool, chamfering tool, and fusion welding machine with interchangeable dies. A measuring tape and support stands are also useful. Use safety glasses and heat-resistant gloves. With these tools, PPR-AL Stabi pipe installation is straightforward. The tools are the same as for standard PPR, with the addition of a chamfering tool for aluminum stripping. Example: a complete tool kit for professional installation.
